Jesus Power Assemblies of God — Completed LED Wall and Stage Lighting

The Challenge

Jesus Power Assemblies of God had outgrown their existing setup. Three aging projectors — one large rear-projection unit serving as the main stage backdrop and two side-wall projectors — were struggling to deliver the clarity and brightness the space needed. The screens washed out under stage lighting, the projection surfaces took up valuable wall real estate, and the overall visual experience didn't match the energy of the ministry.

They needed a complete overhaul — not just a single screen swap, but a whole-room visual strategy with LED displays at every key position in the sanctuary.

Before — Original projector setup at Jesus Power

Before — Three projector screens

After — All three LED screens installed

After — Three LED displays across the sanctuary

Our Approach — 3 Phases

Rather than shutting the church down for a long install, we structured the project in three phases — each one completing a section of the sanctuary while keeping the ministry fully operational throughout.

Phase 1 — Main Stage LED Wall

We removed the existing rear-projection screen and replaced it with a ground-stacked P2.6 LED panel — the centerpiece of the entire transformation. At nearly 28 feet wide, it commands the room and delivers brilliant, consistent brightness under any lighting condition.

  • P2.6 pixel pitch LED panel — ground stack configuration
  • 27.8 ft wide × 9.8 ft tall
  • Integrated with existing presentation and camera systems
Phase 1 — Center LED wall installed

Phase 2 — Side Walls & Rear Display

With the main stage complete, we turned to the rest of the room. Two wall-mounted LED screens replaced the side projectors, giving every seat in the house an unobstructed view. A smaller rear display was added as a confidence monitor and overflow screen for the back of the sanctuary.

  • Side screens: P2.5 pixel pitch — 17 ft wide × 8 ft tall (wall mounted, ×2)
  • Rear display: P2 — 9.8 ft wide × 6.5 ft tall (wall mounted)
  • All screens tied into a single content workflow
Phase 2 — Side wall LED screen installed

Phase 3 — Stage Lighting Upgrade

The final phase tied everything together. With three vivid LED displays now filling the room, the original stage lighting wasn't keeping up. We upgraded the full lighting rig to complement the new displays — giving the worship team dynamic, production-quality lighting that enhances the screens rather than competing with them.

  • Full stage lighting rig replacement
  • LED fixtures designed to work with high-brightness LED walls
  • Balanced for both in-room worship and livestream camera exposure
Phase 3 — Stage lighting installation
Phase 3 — Completed sanctuary with full LED and lighting

Results

Full Sanctuary Coverage

Every seat now has a clear, unobstructed view of worship content.

Zero Washout

LED panels stay vibrant under full stage lighting — no more faded projections.

Unified Visual System

Three screens and upgraded lighting operating as one cohesive production environment.

"The screen totally changes the space. It's a night and day difference from the old projector."

Music Director

Jesus Power Assemblies of God

Ready to Transform Your Ministry?

Contact us today for customized solutions that inspire.

By submitting this form you acknowledge that you have read and agree to our Terms & Conditions. All proposals are subject to those terms.